NCERT Solutions for Class 12 Chemistry Chapter 1

NCERT Solutions for Class 12 Chemistry Chapter 1 The Solid State

As we know, there are three states of matter: solid, liquid, and gas. In this chapter of the NCERT book, you will be introduced to different types of structures of solids that exist in nature. E.g., NaCl has a cubic structure, and Graphite has a hexagonal structure. At the end of the Extramarks NCERT Solutions for Class 12 Chemistry Chapter 1, you will also come to know the defects in these solid structures. These defects in the solids also introduce some magnetic properties. 

NCERT Solutions for Class 12 Chemistry Chapter 1 – The Solid State is prepared in a very comprehensive manner. These solutions help students to grasp the topic thoroughly. By referring to the NCERT solutions for Class 12, students can understand all the essential concepts and practice questions well before their examination.

The key topics covered in NCERT solutions class 12 Chemistry chapter 1 include

Exercise Topic
1.1 Introduction
1.2   Classification of crystalline solids
1.3 Crystal Lattices and Unit cells
1.5 Closed Packed Structure
1.6 Packing Efficiency
1.7 Calculations involving Unit cells Dimension
1.8 Imperfections in solids
1.9 Electrical and Magnetic properties
1.10 FAQ

Students may click on the respective exercise of NCERT Solutions For Class 12 Chemistry Chapter 1 to access study materials. The Solid State NCERT Solution that we provide can help students prepare well for their examinations.

Below is the brief of the Chemistry class 12 NCERT solutions chapter 1.

1.1 Introduction

Solids mostly surround us, and we use them more often than liquids and gases. Three states of matter are – solid, liquid and gas. Some of the properties of solids are:

  • Solids have a specific volume, mass and shape.
  • Distance and force: Intermolecular distance is short, as intermolecular force is strong
  • Solids are rigid and incompressible
  • Particles have fixed positions

1.2 Classification of crystalline solids

Under this section of the NCERT solutions class 12 Chemistry chapter 1, students will learn about the classification of crystalline solids. A solid interface is explained as a few atomic layers that separate two solids in intimate contact. The properties differ remarkably from those of the bulk material it separates.

Based on crystal structures, solids can be categorised as Amorphous and crystalline solids.

Crystalline solids: They have a specific geometric shape and have long-range order. These are isotropic and do not have definite heat of fusion. Examples of crystalline solids are diamond, sodium nitrate and sodium chloride. Crystalline solids are also called true solids. However, crystalline solids can be classified into molecular, ionic, metallic, and covalent. 

Amorphous Solids: The solids in which the particles are arranged irregularly and solids that lack the overall sequence of a crystal lattice are known as amorphous solids. The amorphous word came from the Greek ‘amorphous’, which means no form. The particles are of indefinite shape as well as have no long-range order. An amorphous solid example is Quartz glass, gels, and nanostructured materials. Amorphous solids are also known as supercooled or pseudo solids. Students may refer to NCERT Solutions for Class 12 Chemistry Chapter 1 Exercise 1.2 to grasp all the key concepts in detail.  

Key Features of Crystalline and Amorphous Solids

The key features of crystalline and amorphous solids are a part of NCERT Solutions For Class 12 Chemistry Chapter 1 and include

Nature

  • Crystalline Solids – True Solids
  • Amorphous Solids – Pseudo – Solids as well as supercooled liquids.

Geometry

  • Crystalline Solids – Here, the particles are arranged in a repeating pattern. They have a regular arrangement resulting in a definite shape.
  • Amorphous Solids – Particles are not appropriately arranged. They have an irregular arrangement resulting in indefinite shape.

Melting Points

  • Crystalline Solids – melt at a sharp melting point temperature
  • Amorphous Solids – Gradually soften gradually over a  range of temperatures

Heat of Fusion

  • Crystalline Solids – They have definite and characteristic heat of fusion.
  • Amorphous Solids – Here, they do not have definite heat of fusion

Isotropism

  • Crystalline Solids – Anisotropic in nature.
  • Amorphous Solids – Isotropic in nature.

Cleavage Property

  • Crystalline Solids – When cutting using a tool with a sharp edge, split into two new halves pieces, and the newly generated surfaces are plain.
  • Amorphous Solids – When cutting using a tool with a sharp edge, they cut into two pieces with irregular surfaces

Rigidity

  • Crystalline Solids are rigid solids, and applying mild forces can’t change their shape.
  • Amorphous Solids – They are not rigid, so mild effects may change the shape.

Students may refer to NCERT Solutions For Class 12 Chemistry Chapter 1 for detailed study material on Solid State.

1.3Crystal Lattices and Unit cells

Under this exercise of chapter 1 Chemistry class 12 NCERT solutions, students will learn about the following.

Unit Cell: The smallest repeating pattern of the crystal lattice is the unit cell, the building block of a crystal.

Types Of Unit Cell: An entire lattice can be obtained by repeating a small portion known as the unit cell. Different varieties of the unit cell are as under. 

  1. Primitive Cubic Unit Cell
  2. Body-centred Cubic Unit Cell
  3. Face centred cubic unit cell

Crystal Lattices

A crystal structure comprises atoms and lattice points or lattice axes. Significantly, the structure is an ordered array of atoms, ions or molecules.

The main characteristics of Crystal Lattice:

  • Each point in a lattice is known as a lattice point or site.
  • Each point in a crystal lattice indicates one constituent particle, which may be an atom, molecule or ion.
  • Lattice points are attached by straight lines to bring out the geometry of the lattice.

1.4 Number of Atoms in a Unit Cell

Under this exercise of NCERT Solutions For Class 12 Chemistry Chapter 1, students will learn about atoms in a unit cell.

Primitive unit cell: The primitive cubic unit cell contains atoms only at its corner. Each atom at a corner is shared among eight adjacent unit cells, four-unit cells on the same side and four-unit cells on the upper or lower side. Hence, only 1/8th of an atom belongs to a particular unit cell.

Body Centred unit Cell: A body-centred cubic unit cell contains an atom at each corner and one at its body centre.

Number of Atoms in BCC Cell:

Thus, in a BCC cell, we have

  • 8 corners × 1/8 per corner atom = 8 × 1/8 = 1 atom
  • 1 body centre atom is = 1 × 1 = 1 atom

Hence, the exact number of atoms present per unit cell = 2 atoms.

Face-Centred unit Cell: A face-centred unit cell contains atoms at every corner and the centre of all the faces of the cube. The atom present at the face centre is shared among two adjacent unit cells; only 1/2 of each atom belongs to the unit cell (see Figure 1).

Number of Atoms in BCC Cell

  • 8 corners × 1/8 per corner atom = 8 × 1/8 = 1 atom
  • 6 face-centred atoms × 1/2 atom per unit cell = 3 atoms

Hence, the total number of atoms per unit cell = 4 atoms. Students can refer to NCERT Solutions For Class 12 Chemistry Chapter 1 for more information on the number of Atoms in a Unit Cell.

1.5 Close Packed Structures

Under Exercise 1.5 of the NCERT Solutions For Class 12 Chemistry Chapter 1, students will study that the constituent particles are close-packed in a solid state, leaving the minimum vacant space.

(a) Close Packing in One Dimension: In close packing of one dimension, spheres are arranged in a row such that adjacent atoms are in contact with each other. The coordination number is explained as the no. of nearest neighbour particles. In the case of one-dimensional close packing, the coordination number equals 2.

(b) Close packing in Two Dimensions: The two-dimensional close-packed structure can be generated by stacking the row of closed packed spheres. Students can refer to Extramarks NCERT Solutions For Class 12 Chemistry Chapter 1 for study material on the exercise. Closed packing in two dimension stacking is done in two ways, Hexagonal close-packing and cubic close packing, as shown in the figure below. 

The Formula of a Compound and the Number of Voids Filled

Voids mean space between the constituent particles. Voids represent the vacant space between the constituent particles in a closely packed structure in solid states. The 3D structure has two types of interstitial voids, Tetrahedral voids and Octahedral voids.

1.6 Packing Efficiency

As per NCERT Solutions For Class 12 Chemistry Chapter 1, Packing Efficiency is the percentage of the total place occupied by the particles.

Packing Efficiency in hcp and ccp Structures: Both Hexagonal close packing (hcp) and cubic close packing (ccp) have the exact packing efficiency

We can also write it as

Packing efficiency = volume occupied by four spheres in the unit cell x 100

                                            The total volume of the unit cell

Students may refer to class 12 Chemistry NCERT solutions chapter 1 to know more.

1.7 Calculations Involving Unit Cell Dimensions

The unit cell can be understood as a three-dimensional structure consisting of one or more atoms. The volume of this unit cell can be calculated using unit cell dimensions. 

Mass of unit cell = the number of atoms in unit cell × mass of each atom = z × m

In the above formula, z = number of atoms in the unit cell and m = mass of each atom

The mass of an atom can be given with the help of Avogadro number and molar mass as:

M/NA

Where M = molar mass

NA = Avogadro’s number

The volume of the unit cell, V = a3

=> Density of unit cell = mass of unit cell/ volume of the unit cell

=> Density of unit cell = m/V = z×ma/a3 = z×M/a3×NA

Students may refer to NCERT Solutions For Class 12 Chemistry Chapter 1 Exercise 1.7 to know more.

1.8 Imperfections in Solids

Point defects explain the imperfections of solids and the types of point defects. Point defects are accounted for when the crystallization process occurs at a very fast rate. These defects mainly happen due to deviation in the arrangement of constituting particles. The flaws are of two types, point defects and line defects.

Point defects are irregularities or deviations from the ideal arrangement around a point or an atom in a crystalline substance. On the other hand, Line defects are irregularities or deviations from an ideal arrangement in entire rows of lattice points. These irregularities are called crystal defects. 

Under NCERT Solutions  Class 12 Chemistry Chapter 1, Point defects can be classified into

  • Stoichiometric defect – The ratio of positive and negative ions (Stoichiometric) and electrical neutrality of a solid are not disturbed in this kind of point defect. Sometimes it is also known as thermodynamic or intrinsic defects. Primarily, they are of two types: Vacancy defect and Interstitial defect
  • Frenkel defect –This defect is generally shown in ionic solids; the smaller ion (cation) moves out of its place and occupies an intermolecular space. A vacancy defect is created in its original position, and the interstitial defect is experienced at its new location.

1.9 Electrical and Magnetic Properties

Under NCERT Solutions For Class 12 Chemistry Chapter 1, solids can be described into three types based on their conductivities. They are:

  • Conductors
  • Insulators
  • Semiconductors

Magnetic properties are the study of Magnetic Materials. The material is generally placed in a uniform magnetic field, and then the magnetic field is varied. 

There are five major kinds of magnetic behaviour:

  • Diamagnetic materials
  • Paramagnetic materials
  • Ferromagnetic materials
  • Antiferromagnetic materials
  • Ferrimagnetic materials

For a detailed description of electrical and magnetic properties, students can refer to NCERT Solutions  Class 12 Chemistry Chapter 1 provided by Extramarks. 

NCERT Solutions Class 12 Chemistry Chapter 1 Article Link

NCERT solutions class 12 Chemistry chapter 1 is explained in detail by the experts of Extramarks. In addition to chapter 1, students can access NCERT Solution for all other Chemistry chapters of class 12. Furthermore, students can click on the links provided below to access the study material of different classes.

NCERT Solution Class 11

NCERT Solution Class 10

NCERT Solution Class 9

NCERT Solution Class 8

NCERT Solution Class 7

NCERT Solution Class 6

NCERT Solution Class 5

NCERT Solution Class 4

NCERT Solution Class 3

NCERT Solution Class 2

NCERT Solution Class 1

In addition to NCERT Solutions For Class 12 Chemistry Chapter 1, students may also access various other study materials such as past year questions papers, revision notes, important questions and more on Extramarks. 

Q.1 Define the term ‘amorphous’. Give a few examples of amorphous solids.

Ans.

Amorphous solids are the solids whose constituent particles are of irregular shapes and have short range order. These solids are isotropic in nature and melt over a range of temperature. Therefore, amorphous solids are sometimes called pseudo solids or super cooled liquids. They do not have definite heat of fusion. When cut with a sharp-edged tool, they cut into two pieces with irregular surfaces. Examples of amorphous solids include glass, rubber, and plastic.

Q.2 What makes a glass different from a solid such as quartz? Under what conditions could quartz be converted into glass?

Ans.

The arrangement of the constituent particles makes glass different from quartz. In glass, the constituent particles have short range order, but in quartz, the constituent particles have both long range and short range orders. Quartz can be converted into glass by heating and then cooling it rapidly.

Q.3 Classify each of the following solids as ionic, metallic, molecular, network (covalent) or amorphous.

(i) Tetra phosphorus decoxide (P4O10) (vii) Graphite
(ii) Ammonium phosphate (NH4)3PO4 (viii) Brass
(iii) SiC (ix) Rb
(iv) I2 (x) LiBr
(v) P4 (xi) Si
(vi) Plastic

Ans.

Ionic→ (ii) Ammonium phosphate (NH4)3PO4, (x) LiBr

Metallic→ (viii) Brass, (ix) Rb

Molecular→ (i) Tetra phosphorus decoxide (P4O10), (iv) I2, (v) P4

Covalent (network) → (iii) SiC, (vii) Graphite, (ix) Si

Amorphous→ (vi) Plastic

Q.4 (i) What is meant by the term ‘coordination number’?
(ii) What is the coordination number of atoms:
(a) in a cubic close-packed structure?
(b) in a body-centred cubic structure?

Ans.

(i) The number of nearest neighbours of any constituent particle present in the crystal lattice is called its coordination number.

(ii) The coordination number of atoms.

(a) in a cubic close packed structure is 12, and

(b) in a body centred cubic structure is 8

Q.5 How will you distinguish between the following pairs of terms:

(i) Hexagonal close-packing and cubic close-packing?
(ii) Crystal lattice and unit cell?
(iii) Tetrahedral void and octahedral void?

Ans.

(i) A 2-D hexagonal close-packing contains two types of triangular voids (a and b) as shown in figure 1. Let us call this 2-D structure as layer A. Now, particles are kept in the voids present in layer A (it can be easily observed from figures 2 and 3 that only one of the voids will be occupied in the process, i.e., either a or b). Let us call the particles or spheres present in the voids of layer A as layer B. Now, two types of voids are present in layer B (c and d). Unlike the voids present in layer A, the two types of voids present in layer B are not similar. Void c is surrounded by 4 spheres and is called the tetrahedral void. Void d is surrounded by 6 spheres and is called the octahedral void.

Fig-1

Fig-2

Fig-3

Now, the next layer can be placed over layer B in 2 ways.

Case 1: When the third layer (layer C) is placed over the second one (layer B) in such a manner that the spheres of layer C occupy the tetrahedral voids c.

In this case we get hexagonal close-packing. This is shown in figure 4. In figure 4.1, layer B is present over the voids a and layer C is present over the voids c. In figure 4.2, layer B is present over the voids b and layer C is present over the voids c. It can be observed from the figure that in this arrangement, the spheres present in layer C are present directly above the spheres of layer A. Hence, we can say that the layers in hexagonal close-packing are arranged in an ABAB….. pattern.

Fig-4.1

Fig-4.2

Case 2: When the third layer (layer C) is placed over layer B in such a manner that the spheres of layer C occupy the octahedral voids d.

In this case we get cubic close-packing. In figure 5.1, layer B is present over the voids a and layer C is present over the voids d. In figure 5.2, layer B is present over the voids b and layer C is present over the voids d. It can be observed from the figure that the arrangement of particles in layer C is completely different from that in layers A or B. When the fourth layer is kept over the third layer, the arrangement of particles in this layer is similar to that in layer A. Hence, we can say that the layers in cubic close-packing are arranged in an ABCABC….. pattern.

5.1

Fig-5.2

The side views of hcp and ccp are given in figures 6.1 and 6.2 respectively.

Fig-6.1

Fig-6.2

(ii) The diagrammatic representation of the constituent particles (atoms, ions, or molecules) present in a crystal in a regular three-dimensional arrangement is called crystal lattice.

A unit cell is the smallest three-dimensional portion of a crystal lattice. When repeated again and again in different directions, it generates the entire crystal lattice.

(iii) A void surrounded by 4 spheres is called a tetrahedral void and a void surrounded by 6 spheres is called an octahedral void. Figure 1 represents a tetrahedral void and figure 2 represents an octahedral void.

Q.6

How many lattice points are there in one unit cell of each of the following lattice?

(i) Face-centred cubic
(ii) Face-centred tetragonal
(iii) Body-centred

Ans.

(i) There are 14 (8 from the corners + 6 from the faces) lattice points in face-centred cubic.
Lattice points per unit cell = 8 x 1/8 + 6 x ½
= 4
(ii) There are 14 (8 from the corners + 6 from the faces) lattice points in face-centred tetragonal.
Lattice points per unit cell = 8 x 1/8 + 6 x ½
= 4
(iii) There are 9 (1 from the centre + 8 from the corners)
Lattice points per unit cell = 8 x 1/8 + 1
= 2

Q.7 Explain
(i) The basis of similarities and differences between metallic and ionic crystals.
(ii) Ionic solids are hard and brittle.

Ans.

(i) The basis of similarities between metallic and ionic crystals is that both these crystal types are held by the electrostatic force of attraction. In metallic crystals, the electrostatic force acts between the positive ions and the electrons. In ionic crystals, it acts between the oppositely-charged ions. Hence, both have high melting points.

The basis of differences between metallic and ionic crystals is that in metallic crystals, the electrons are free to move and so, metallic crystals can conduct electricity. However, in ionic crystals, the ions are not free to move. As a result, they cannot conduct electricity. However, in molten state or in aqueous solution, they do conduct electricity.

(ii) The constituent particles of ionic crystals are ions. These ions are held together in three-dimensional arrangements by the electrostatic force of attraction. Since the electrostatic force of attraction is very strong, the charged ions are held in fixed positions. This is the reason why ionic crystals are hard and brittle.

Q.8 A cubic solid is made of two elements P and Q. Atoms of Q are at the corners of the cube and P at the body-centre. What is the formula of the compound? What are the coordination numbers of P and Q?

Ans.

It is given that the atoms of Q are present at the corners of the cube.

Therefore, number of atoms of Q in one unit cell

=8* 1 8 =1 MathType@MTEF@5@5@+=feaaguart1ev2aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLnhiov2DGi1BTfMBaerbwvMCKfMBHbqedmvETj2BSbqefm0B1jxALjhiov2DaebbnrfifHhDYfgasaacH8IrFz0xbbf9q8WrFfeuY=Hhbbf9v8qqaqFr0xc9pk0xbba9q8WqFfea0=yr0RYxir=Jbba9q8aq0=yq=He9q8qqQ8frFve9Fve9Ff0dmeaacaGaamaadaWaaiqacaabaeaafaaakeaacqGH9aqpcaaI4aWaaSaaaeaacaaIXaaabaGaaGioaaaacqGH9aqpcaaIXaaaaa@3DE7@

It is also given that the atoms of P are present at the body-centre.

Therefore, number of atoms of P in one unit cell = 1

This means that the ratio of the number of P atoms to the number of Q atoms, P:Q =1:1

Hence, the formula of the compound is PQ.

The coordination number of both P and Q is 8.

Q.9 What is a semiconductor? Describe the two main types of semiconductors and contrast their conduction mechanism.

Ans.

Semiconductors are substances having conductance in the intermediate range of 106 to 104 ohm−1m−1.

The two main types of semiconductors are:

(i) n-type semiconductor

(ii) p-type semiconductor

n-type semiconductor: The semiconductor whose increased conductivity is a result of negatively-charged electrons is called an n-type semiconductor. When the crystal of a group 14 element such as Si or Ge is doped with a group 15 element such as P or As, an n-type semiconductor is generated.

Si and Ge have four valence electrons each. In their crystals, each atom forms four covalent bonds. On the other hand, P and As contain five valence electrons each. When Si or Ge is doped with P or As, the latter occupies some of the lattice sites in the crystal. Four out of five electrons are used in the formation of four covalent bonds with four neighbouring Si or Ge atoms. The remaining fifth electron becomes delocalized and increases the conductivity of the doped Si or Ge.

p-type semiconductor: The semiconductor whose increased in conductivity is a result of electron hole is called a p-type semiconductor. When a crystal of group 14 elements such as Si or Ge is doped with a group 13 element such as B, Al, or Ga (which contains only three valence electrons), a p-type of semiconductor is generated.

Perfect crystal of Si n- type semiconductor p- type semiconductor

When a crystal of Si is doped with B, the three electrons of B are used in the formation of three covalent bonds and an electron hole is created. An electron from the neighbouring atom can come and fill this electron hole, but in doing so, it would leave an electron hole at its original position. The process appears as if the electron hole has moved in the direction opposite to that of the electron that filled it. Therefore, when an electric field is applied, electrons will move toward the positively-charged plate through electron holes.However, it will appear as if the electron holes are positively-charged and are moving toward the negatively-charged plate.

Q.10 Classify each of the following as being either a p-type or an n-type semiconductor:
(i) Ge doped with In
(ii) B doped with Si.

Ans.

(i) Ge (a group 14 element) is doped with In (a group 13 element). Therefore, a hole will be created and the semiconductor generated will be a p-type semiconductor.

(ii) B (a group 13 element) is doped with Si (a group 14 element). So, there will be an extra electron and the semiconductor generated will be an n-type semiconductor.

Q.11 How can you determine the atomic mass of an unknown metal if you know its density and the dimension of its unit cell? Explain.

Ans.

By knowing the density of an unknown metal and the dimension of its unit cell, the atomic mass of the metal can be determined.

Let ‘a’ be the edge length of a unit cell of a crystal, ‘d’ be the density of the metal, ‘m’ be the atomic mass of the metal and ‘z’ be the number of atoms in the unit cell.

Now, density of the unit cell = mass of the unit cell / volume of the unit cell

d= Zm a 3 ( i ) [ Since mass of the unit cell = Number of atoms in the unit cell ×Atomic mass ]

Q.12 ‘Stability of a crystal is reflected in the magnitude of its melting point’. Comment Collect melting points of solid water, ethyl alcohol, diethyl ether and methane from a data book. What can you say about the intermolecular forces between these molecules?

Ans.

Higher the melting point, greater is the intermolecular force of attraction and greater is the stability. A substance with higher melting point is more stable than a substance with lower melting point.

The melting points of the given substances are:

Solid water → 273 K

Ethyl alcohol → 158.8 K

Diethyl ether → 156.85 K

Methane → 89.34 K

Now, on observing the values of the melting points, it can be said that among the given substances, the intermolecular force in solid water is the strongest and that in methane is the weakest.

Q.13 Calculate the efficiency of packing in case of a metal crystal for

(i) simple cubic
(ii) body-centred cubic
(iii) face-centred cubic (with the assumptions that atoms are touching each other).

Ans.

(i) Simple cubic

In a simple cubic lattice, the particles are located only at the corners of the cube and touch each other along the edge.

Let the edge length of the cube be ‘a’ and the radius of each particle be r.

So, we can write:

a = 2r

Now, volume of the cubic unit cell =a3

=(2r)3

=8r3

We know that the number of particles per unit cell is 1.

=43πr3Therefore, packing efficiency=Valume of one particleVolume of cubic unit cell×100%Hence, packing efficiency=16π×100%=16×227×100%=52.4%

(ii) Body-centred cubic

It can be observed from the above figure that the atom at the centre is in contact with the other two atoms diagonally arranged.

From ∆FED, we have:

b2=a2+a2b2=2a2b=2aAgain, from ΔAFD, we have:c2=a2+b2c2=a2+2a2(Since b2=2a2)c2=3a2c=3 Let the radiusoftheatomber.Lengthofthebodydiagonal, c = 4r3 a=4ra=4r3orr=3a4Volume of cube,a3=(4r3)3A bodycentred cubic lattice contains 2 atoms.So, volume of the occupied cubic lattice=2π43r3=83πr3Packingefficiency=volumeoccupiedbytwospheresintheunitcellTotalvolumeoftheunitcell×100%=83πr3(43r)3×100%=83πr36433r3×100%=68%

(iii) Face-centred cubic

Let the edge length of the unit cell be ‘a’ and the length of the face diagonal AC be b.

From ΔABC, we have:AC2=BC2+AB2b2=a2+a2b2=2a2b=2 aLet r be the radius of the atom.Now, from the figure, it can be observed that:b=4r2a=4ra=2r2Now, volume of the cube,a3=(2r2)3We know that the number of atoms per unit cell is 4.So, volume of the occupied unit cell=4π43r3Packingefficiency=VolumeoccupiedbysheresintheunitcellTotalvolumeoftheunitcell×100%=4π43r3(2r2)3×100%=163πr32r316×100%=74%

Q.14 Silver crystallises in fcc lattice. If edge length of the cell is 4.07×10−8 cm and density is 10.5g cm−3, calculate the atomic mass of silver.

Ans.

It is given that the edge length, a = 4.077 × 10−8 cm

Density, d = 10.5g cm−3

As the lattice is fcc type, the number of atoms per unit cell, z=4

We also know that, NA = 6.022 × 1023 mol−1

Using the relation:

d=zMa3NAM=da3NAz=10.5gcm3×(4.077×108cm)3×6.022×1023mol14=107.13gmol1Therefore, atomic mass of silver =107.13u

Q.15 Niobium crystallizes in body-centred cubic structure. If density is 8.55g cm−3, calculate atomic radius of niobium using its atomic mass 93 u.

Ans.

It is given that the density of niobium, d = 8.55g cm−3

Atomic mass, M = 93g mol−1

As the lattice is bcc type, the number of atoms per unit cell, z = 2

We also know that, NA = 6.022 × 1023 mol−1

Applying the relation:

d=zMa3NAa3=zMdNA=2×93gmol18.55gcm3×6.022×1023mol1=3.612×1023cm3so, a=3.306×108cmFor body-centred cubic unit cell:r=34a=34×3.306×108cm= 1.432 × 109 cm= .1432 nm

Q.16 If the radius of the octachedral void is r and radius of the atoms in close packing is R, derive relation between r and R.

Ans.

A sphere with centre O, is fitted into the octahedral void as shown in the above figure. It can be observed from the figure that ∆POQ is right-angled

∠POQ = 900

Now, applying Pythagoras theorem, we can write:

PQ 2 = PO 2 + OQ 2 ( 2R ) 2 = ( R+r ) 2 + ( R+r ) 2 ( 2R ) 2 =2 ( R+r ) 2 2R 2 = ( R+r ) 2 2 R=R+r r= 2 R−R r=0.414 R MathType@MTEF@5@5@+=feaaguart1ev2aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLnhiov2DGi1BTfMBaeXatLxBI9gBaerbujxyKLgDP9MBHXgibjxyIL2yaerbd9wDYLwzYbItLDharqqtubsr4rNCHbGeaGqiVy0xg9vqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq=Jc9vqaqpepm0xbba9pwe9Q8fs0=yqaqpepae9pg0FirpepeKkFr0xfr=xfr=xb9adbaqaaeaacaGaaiaabaWaaqaabaqbaaGceaqabeaacaqGqbGaaeyuamaaCaaaleqabaGaaeOmaaaakiabg2da9iaabcfacaqGpbWaaWbaaSqabeaacaqGYaaaaOGaey4kaSIaae4taiaabgfadaahaaWcbeqaaiaabkdaaaaakeaacqGHshI3daqadaqaaiaabkdacaqGsbaacaGLOaGaayzkaaWaaWbaaSqabeaacaqGYaaaaOGaeyypa0ZaaeWaaeaacaqGsbGaey4kaSIaaeOCaaGaayjkaiaawMcaamaaCaaaleqabaGaaeOmaaaakiabgUcaRmaabmaabaGaaeOuaiabgUcaRiaabkhaaiaawIcacaGLPaaadaahaaWcbeqaaiaabkdaaaaakeaacqGHshI3daqadaqaaiaabkdacaqGsbaacaGLOaGaayzkaaWaaWbaaSqabeaacaqGYaaaaOGaeyypa0JaaeOmamaabmaabaGaaeOuaiabgUcaRiaabkhaaiaawIcacaGLPaaadaahaaWcbeqaaiaabkdaaaaakeaacqGHshI3caGGGcGaaiiOaiaabkdacaqGsbWaaWbaaSqabeaacaqGYaaaaOGaeyypa0ZaaeWaaeaacaqGsbGaey4kaSIaaeOCaaGaayjkaiaawMcaamaaCaaaleqabaGaaeOmaaaaaOqaaiabgkDiEpaakaaabaGaaeOmaaWcbeaakiaabkfacqGH9aqpcaqGsbGaey4kaSIaaeOCaaqaaiabgkDiEJqacabaaaaaaaaapeGaa8NCaiabg2da9maakaaapaqaa8qacaaIYaGaa8NuaaWcbeaakiabgkHiTiaa=jfaa8aabaGaeyO0H4TaaeOCaiabg2da9iaacIcacaqGsbaabaGaeyO0H4TaaiiOaiaabkhacqGH9aqpcaaIWaGaaiOlaiaabsdacaqGXaGaaeinaiaabkfaaaaa@932B@

Q.17 Copper crystallises into a fcc lattice with edge length 3.61×10−8 cm. Show that the calculated density is in agreement with its measured value of 8.92 g cm−3.

Ans.

Edge length, a = 3.61 × 10−8 cm

As the lattice is fcc type, the number of atoms per unit cell, z=4

Atomic mass, M = 63.5 g mol−1

We also know that, NA = 6.022 × 1023 mol−1

Applying the relation:

d=zMa3NA=4×63.5g mol1(3.61×108)3×6.022×1023mol1=8.97g cm3

The measured value of density is given as 8.92g cm−3. Hence, the calculated density 8.97g cm−3 is in agreement with its measured value.

Q.18 Analysis shows that nickel oxide has the formula Ni0.98O1.00. What fractions of nickel exist as Ni2+ and Ni3+ ions?

Ans.

The formula of nickel oxide is Ni0.98O1.00.

Therefore, the ratio of the number of Ni atoms to the number of O atoms,

Ni : O = 0.98 : 1.00 = 98 : 100

Now, total charge on 100 O2−ions = 100 × (−2)

= −200

Let the number of Ni2+ ions be x.

So, the number of Ni3+ ions is 98 − x.

Now, total charge on Ni2+ ions = x(+2)

= +2x

And, total charge on Ni3+ ions = (98 − x)(+3)

= 294 − 3x

Since, the compound is neutral, we can write:

2x + (294 − 3x) + (−200) = 0

⇒ −x + 94 = 0

⇒ x = 94

Therefore, number of Ni2+ ions = 94

And, number of Ni3+ ions = 98 – 94 = 4

Hence, fraction of nickel that exists as Ni2+ = 94/98
= 0.959
And, fraction of nickel that exists as Ni3+ = 4/98
= 0.041
Alternatively, fraction of nickel that exists as Ni3+ = 1 − 0.959
= 0.041

Q.19 Non-stoichiometric cuprous oxide, Cu2O can be prepared in laboratory. In this oxide, copper to oxygen ratio is slightly less than 2:1. Can you account for the fact that this substance is a p-type semiconductor?

Ans.

In the cuprous oxide (Cu2O) prepared in the laboratory, copper to oxygen ratio is slightly less than 2:1. This means that the number of Cu+ ions is slightly less than twice the number of O2− ions. This is because some Cu+ ions have been replaced by Cu2+ ions.

Every Cu2+ ion replaces two Cu+ ions, thereby creating holes. As a result, the substance conducts electricity with the help of these positive holes. Hence, the substance is a p-type semiconductor.

Q.20 Ferric oxide crystallises in a hexagonal close-packed array of oxide ions with two out of every three octahedral holes occupied by ferric ions. Derive the formula of the ferric oxide.

Ans.

Let the number of oxide (O2−) ions be x.

So, number of octahedral voids = x
It is given that two out of every three octahedral holes are occupied by ferric ions.
So, number of ferric (Fe3+) ions=2/3 x
Therefore, ratio of the number of Fe3+ ions to the number of O2− ions,
Fe3+ : O2- = 2/3 x : x
= 2/3 : 1
= 2 : 3
Hence, the formula of the ferric oxide is Fe2O3.

Q.21 Gold (atomic radius = 0.144 nm) crystallizes in a face-centred unit cell. What is the length of a side of the cell?

Ans.

For a face-centred unit cell:
a= √2 r
It is given that the atomic radius, r = 0.144 nm
So, a=√2 × 0.144
=0.407nm
Hence, length of a side of the cell =0.407 nm

Q.22 In terms of band theory, what is the difference

(i) Between a conductor and an insulator
(ii) Between a conductor and a semiconductor

Ans.

(i) The valence band of a conductor is partially-filled or it overlaps with a higher energy, unoccupied conduction band.

On the other hand, in the case of an insulator, the valence band is fully-filled and there is a large gap between the valence band and the conduction band.

(ii) In the case of a conductor, the valence band is partially-filled or it overlaps with a higher energy, unoccupied conduction band. So, the electrons can flow easily under an applied electric field.

On the other hand, the valence band of a semiconductor is filled and there is a small gap between the valence band and the next higher conduction band. Therefore, some electrons can jump from the valence band to the conduction band and conduct electricity.

Q.23 Explain the following terms with suitable examples:

(i) Schottky defect
(ii) Frenkel defect
(iii) Interstitials and
(iv) F-centres

Ans.

(i) Schottky defect: Schottky defect is basically a vacancy defect shown by ionic solids. In this defect, an equal number of cations and anions are missing to maintain electrical neutrality. It decreases the density of a substance. Significant number of Schottky defects is present in ionic solids. For example, in NaCl, there are approximately 106 Schottky pairs per cm3 at room temperature. Ionic substances containing similar-sized cations and anions show this type of defect. For example: NaCl, KCl, CsCl, AgBr, etc.

(ii) Frenkel defect: Ionic solids containing large differences in the sizes of ions show this type of defect. When the smaller ion (usually cation) is dislocated from its normal site to an interstitial site, Frenkel defect is created. It creates a vacancy defect as well as an interstitial defect. Frenkel defect is also known as dislocation defect. Ionic solids such as AgCl, AgBr, AgI, and ZnS show this type of defect.

(iii) Interstitials: Interstitial defect is shown by non-ionic solids. This type of defect is created when some constituent particles (atoms or molecules) occupy an interstitial site of the crystal. The density of a substance increases because of this defect.

(iv) F-centres: When the anionic sites of a crystal are occupied by unpaired electrons, the ionic sites are called F-centres. These unpaired electrons impart colour to the crystals. For example, when crystals of NaCl are heated in an atmosphere of sodium vapour, the sodium atoms are deposited on the surface of the crystal. The Cl ions diffuse from the crystal to its surface and combine with Na atoms, forming NaCl. During this process, the Na atoms on the surface of the crystal lose electrons. These released electrons diffuse into the crystal and occupy the vacant anionic sites, creating F-centres.

Q.24 Aluminium crystallizes in a cubic close-packed structure. Its metallic radius is 125 pm.

(i) What is the length of the side of the unit cell?
(ii) How many unit cells are there in 1.00 cm3 of aluminium?

Ans.

(i)For cubic close-packed structure:a=22r=22×125pm=353.55pm(approximately)(ii)Volume of one unit cell=(354pm)3=4.4×107pm3=4.4×107×1030cm3=4.4×1023cm3Therefore, number of unit cells in 1.00 cm3=1.00cm34.4×1023cm3=2.27×1022

Q.25 If NaCl is doped with 10−3 mol % of SrCl2, what is the concentration of cation vacancies?

Ans.

It is given that NaCl is doped with 10−3 mol % of SrCl2.

This means that 100 mol of NaCl is doped with 10−3 mol of SrCl2.

Therefore,1 mol of NaCl is doped with 103100 mol of SrCl2=105 mol of SrCl2Cation vacancies produced by one Sr2+ion=1concentration of the cation vacancies produced by 105 mol of Sr2+ ions =105×6.022×1023=6.022×1018mol1Hence, the concentration of cation vacancies created by SrCl2 is 6.022×1018per mol of NaCl.

Q.26 Explain the following with suitable examples:

(i) Ferromagnetism
(ii) Paramagnetism
(iii) Ferrimagnetism
(iv) Antiferromagnetism
(v) 12-16 and 13-15 group compounds.

Ans.

(i) Ferromagnetism: The substances that are strongly attracted by a magnetic field are called ferromagnetic substances. Ferromagnetic substances can be permanently magnetized even in the absence of a magnetic field. Some examples of ferromagnetic substances are iron, cobalt, nickel, gadolinium, and CrO2.

In solid state, the metal ions of ferromagnetic substances are grouped together into small regions called domains and each domain acts as a tiny magnet. In an un-magnetised piece of a ferromagnetic substance, the domains are randomly-oriented and so, their magnetic moments get cancelled. However, when the substance is placed in a magnetic field, all the domains get oriented in the direction of the magnetic field. As a result, a strong magnetic effect is produced. This ordering of domains persists even after the removal of the magnetic field. Thus, the ferromagnetic substance becomes a permanent magnet.

Schematic alignment of magnetic moments in ferromagnetic substances

(ii) Paramagnetism: The substances that are attracted by a magnetic field are called paramagnetic substances. Some examples of paramagnetic substances are O2, Cu2t, Fe3t, and Cr3t.

Paramagnetic substances get magnetized in a magnetic field in the same direction, but lose magnetism when the magnetic field is removed. To undergo paramagnetism, a substance must have one or more unpaired electrons. This is because the unpaired electrons are attracted by a magnetic field, thereby causing paramagnetism.

(iii) Ferrimagnetism: The substances in which the magnetic moments of the domains are aligned in parallel and anti-parallel directions, in unequal numbers, are said to have ferrimagnetism. Examples include Fe3O4 (magnetite), ferrites such as MgFe2O4 and ZnFe2O4.

Ferrimagnetic substances are weakly attracted by a magnetic field as compared to ferromagnetic substances. On heating, these substances become paramagnetic.

Schematic alignment of magnetic moments in ferromagnetic substances

(iv) Antiferromagnetism: Antiferromagnetic substanceshave domain structures similar to ferromagnetic substances, but are oppositely-oriented. The oppositely-oriented domains cancel out each other’s magnetic moments.

Schematic alignment of magnetic moments in antiferromagnetic substances

(v) 12-16 and 13-15 group compounds: The 12-16 group compounds are prepared by combining group 12 and group 16 elements and the 13-15 group compounds are prepared by combining group 13 and group 15 elements. These compounds are prepared to stimulate average valence of four as in Ge or Si. Indium (III) antimonide (InSb), aluminium phosphide (AlP), and gallium arsenide (GaAs) are typical compounds of groups 13-15. GaAs semiconductors have a very fast response time and have revolutionized the designing of semiconductor devices. Examples of group 12-16 compounds include zinc sulphide (ZnS), cadmium sulphide (CdS), cadmium selenide (CdSe), and mercury (II) telluride (HgTe). The bonds in these compounds are not perfectly covalent. The ionic character of the bonds depends on the electronegativities of the two elements.

Please register to view this section

FAQs (Frequently Asked Questions)

1. How important are the NCERT solutions for class 12 Chemistry chapter 1?

The Chemistry class 12 chapter 1 NCERT solutions help students understand the basic concepts of solutions and give a detailed explanation of various laws and formulas under the chapter. The NCERT Solution allows students to study for the exams without depending on someone to explain. Students may refer to NCERT solutions class 12 Chemistry chapter 1 for free on Extramarks.

2. Can the NCERT solutions class 12 Chemistry chapter 1 be used as revision notes?

Yes, NCERT solutions class 12 Chemistry chapter 1 can be used as revision notes as they give all the information that students need to understand the chapter.